![]() So I can only assume the DeckLink 4k Extreme card is not syncing and needs a reference. We actually have a third computer with another DeckLink Duo (1) card and it had the same issue, but once we put the reference to it then it was fixed. How are we able to reference on this card, or get the signal to sync to fix the scrolling image issue? But on this card there is not an input for a reference. We then conncected a reference source to it and it fixed that issue.ĬARD 2 we use PP7 to send out fill and cut signal, for this we use the DeckLink 4k Extreme card. We were having issues with this signal, as the image was scrolling on the screen. We have two imacs, one of them is running ProPresentor 7 and the other one is running ProVideo Player, We are are using two differen cards to get the signal from the imac to the switcher.ĬARD 1 is a deck DeckLink Duo (1). Share settings files among multiple Carbonite Ultra or Ultrix Carbonite systems. Carbonite v7.1 brings a host of new features to streamline and enhance your live productions, including: Ross Platform Manager support for managed systems. Input Frame Synchronisers and Format Converters (FSFC) can be used to adjust incoming signal formats while Processing Amplifiers and Colour Correctors can be applied to any input. Carbonite Ultra and Ultrix Carbonite Upgrades. Here is our work flow and the issues we are facing. Ultrix Carbonite is a comprehensive signal processing toolbox housed in the Ultrix frame. Finally, Carbonite Ultra 60 provides the same I/O capacity, without compromise, in both HD and UHD.We are in the process of installing a new Ross Carbonite swither and we have come accross an issue when trying to get our cut and fill signal to the switcher synced. I believe the GPIO pins can be configured to output tally information with a high level of 5V and low of 0V, so it's possible you could use this as an alternative to the dedicated tally port. Our telephone number is: +1-61 (Toll free within North America +1 83) Our EMEA center is open Monday to Friday 8:30 a.m. It seems like most of the Carbonite switchers also have GPIO ports that are separate from the dedicated tally outputs. Tip: Carbonite automatically accepts RossTalk commands on port 7788. This allows you to perform various functions such as triggering a GPI, or sending commands to the switcher, such as transitioning a key. Additionally, it is the first Carbonite with an internal power supply for easier installation.Ĭarbonite Ultra 60 is an ideal solution for facilities that need the power, affordability, and feature set of Carbonite but require more inputs and outputs than previously available. Phone Support Our North America center is open Monday to Friday 8:30 a.m. Carbonite accepts RossTalk commands over ethernet on port 7788. The Carbonite Ultra 60 package features modular I/O boards, making it easier and less costly for customers to leverage the switcher’s incredible feature set without buying more I/O than necessary while supporting future growth.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |